schema_version: 1 name: prusa-mini-extruder-front intent: 'Reconstruct the Original Prusa MINI extruder front housing (MINI-extruder-front) as editable, parameterized KCL from the attached renders, section drawings and dimension sheet. Frame: x across the plate (-26.5 to 26.5), y through the thickness with the back mating face at y = 0 and the front face at y = 14, z vertical from the bottom face z = -30 to the top lug at z = 33.72. Assembly-governing geometry must be exact: the keyhole central opening (Ø22.5 x 3 recess, Ø16 bore, Ø26 x 6 counterbore on the axis x = -2, z = 0; Ø12 x 3 recess, Ø16 bore and Ø14 counterbore on x = -2, z = 16.4), every Ø3.4 through hole with its Ø6.5 / Ø3.5 counterbore or heat-set trap, the Ø4 filament holes, the hotend clamp channel bores along z at x ~ 25.6, and the mating planes (y = 0, y = 14, z = -30, x = -26.5). Declare each hole as an acceptance cylinder and the mating planes as interfaces with checks. The fan-duct lobe, top-lug fillet and embossed text are cosmetic (optional features). One solid; export STEP and STL. The reference CAD is evaluator-only; the deliverable must be construction, never an import.' units: length: mm angle: deg material: null density_kg_m3: null process: 3D printing; material and print settings unspecified release_status: reconstruction frame: origin: The point [0,0,0] is on the y=0 mating plane, halfway between the x envelope limits and 30 mm above the z=-30 bottom plane. It lies in the central opening, not necessarily in material. The lower opening axis meets y=0 at [-2,0,0]. axes: x: Across the plate toward the half-clamp; left locating side x=-26.5, right envelope x=26.5. front.png plots +x right; back.png plots -x right. y: Through thickness from the back mating datum y=0 to front datum y=14. Screw and keyhole axes run parallel to +y. Camera filenames do not rename these datums. z: Upward from bottom z=-30 to highest lug/web z=33.72; main top ledge z=28. datums: - name: A description: Back mating plane y=0, outward [0,-1,0]. - name: B description: Front plane y=14, outward [0,1,0], 14 mm from A. - name: C description: Bottom plane z=-30, outward [0,0,-1]. - name: D description: Left locating plane x=-26.5, outward [-1,0,0]. envelope: min: [-26.5, 0, -30] max: [26.5, 14, 33.72] tolerance: 0.03 parameters: - name: plateWidth value: 53 unit: mm provenance: stated tolerance: 0.02 description: Overall x span. source: sources/prusa-extruder-front-description.md; '53 x 14 x 63.72 mm' - name: plateThickness value: 14 unit: mm provenance: stated tolerance: 0.02 description: Nominal separation of y=0 and y=14; do not replace with bbox artifact 14.001. source: sources/prusa-extruder-front-description.md; 'front face at y = 14' - name: bottomZ value: -30 unit: mm provenance: stated tolerance: 0.02 description: Bottom datum. source: sources/prusa-extruder-front-description.md; 'flat bottom face at z = -30' - name: lugMaxZ value: 33.72 unit: mm provenance: stated tolerance: 0.02 description: Highest rear web/lug point; the Ø10 lug alone reaches z=33. source: sources/prusa-extruder-front-description.md; 'z vertical (-30 .. +33.72)' - name: bodyTopZ value: 28 unit: mm provenance: stated tolerance: 0.02 description: Main top ledge. source: sources/dimension-sheet.md; planar +z faces at z=28 - name: leftTopChamferZ value: 24 unit: mm provenance: stated tolerance: 0.02 description: Upper left bevel starts here. source: sources/dimension-sheet.md; inclined point [-26.5,0,24] - name: rightTopChamferX value: 22.5 unit: mm provenance: stated tolerance: 0.02 description: Upper right bevel starts here. source: sources/dimension-sheet.md; inclined point [22.5,0,28] - name: leftFootX value: -21.95 unit: mm provenance: stated tolerance: 0.02 description: Lower left vertical foot. source: sources/dimension-sheet.md; -x planar face at x=-21.95 - name: leftShoulderZ value: -21.925 unit: mm provenance: stated tolerance: 0.02 description: Lower left shallow bevel anchor. source: sources/dimension-sheet.md; inclined point [-26.5,0,-21.925] - name: leftDiagonalAnchorX value: -22.946 unit: mm provenance: stated tolerance: 0.02 description: Lower left diagonal plane anchor x. source: sources/dimension-sheet.md; inclined point [-22.946,0,-23.45] - name: leftDiagonalAnchorZ value: -23.45 unit: mm provenance: stated tolerance: 0.02 description: Lower left diagonal plane anchor z. source: sources/dimension-sheet.md; inclined point [-22.946,0,-23.45] - name: rightBottomChamferZ value: -22.75 unit: mm provenance: stated tolerance: 0.02 description: Lower right bevel anchor at x=26.5. source: sources/dimension-sheet.md; inclined point [26.5,0,-22.75] - name: halfWidth value: 26.5 unit: mm provenance: derived tolerance: 0.02 description: Overall half width. formula: plateWidth / 2 - name: overallHeight value: 63.72 unit: mm provenance: derived tolerance: 0.02 description: Overall height. formula: lugMaxZ - bottomZ - name: leftKneeX value: -24.15 unit: mm provenance: measured tolerance: 0.2 description: Raster lower left bevel-junction x. Exact table planes take precedence over raster intersections. source: sources/front.png; original pixel (337,1650); origin (954,1085), scale 25.53 px/mm - name: leftKneeZ value: -22.13 unit: mm provenance: measured tolerance: 0.2 description: Raster lower left bevel-junction z. Exact table planes take precedence over raster intersections. source: sources/front.png; original pixel (337,1650); origin (954,1085), scale 25.53 px/mm - name: leftFootTopZ value: -24.55 unit: mm provenance: measured tolerance: 0.2 description: Raster top of the lower left vertical foot. Exact table planes take precedence over raster intersections. source: sources/front.png; original pixel (393,1712); origin (954,1085), scale 25.53 px/mm - name: lugWebPeakX value: 16.75 unit: mm provenance: measured tolerance: 0.25 description: Raster x of the highest web point. Exact table planes take precedence over raster intersections. source: sources/front.png; original pixel u=1378..1382,v=224; origin (954,1085), scale 25.53 px/mm - name: keyUpperCounterboreDiameter value: 26.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for keyUpperFrontCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 1, hole Ø26, axis point [-2.0, 0.0, 16.4], extent [8.0, 14.0] - name: keyAxisX value: -2.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for keyUpperFrontCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 1, hole Ø26, axis point [-2.0, 0.0, 16.4], extent [8.0, 14.0] - name: keyUpperZ value: 16.4 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for keyUpperFrontCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 1, hole Ø26, axis point [-2.0, 0.0, 16.4], extent [8.0, 14.0] - name: keyMiddleEnd value: 8.0 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for keyUpperFrontCounterbore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 1, hole Ø26, axis point [-2.0, 0.0, 16.4], extent [8.0, 14.0] - name: keyLowerRecessDiameter value: 22.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for keyLowerBackRecess. source: sources/dimension-sheet.md; Cylindrical features row 2, hole Ø22.5, axis point [-2.0, 0.0, 0.0], extent [0.0, 3.0] - name: keyBackDepth value: 3.0 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for keyLowerBackRecess, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 2, hole Ø22.5, axis point [-2.0, 0.0, 0.0], extent [0.0, 3.0] - name: keyUpperBoreDiameter value: 16.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for keyUpperMiddleBore. source: sources/dimension-sheet.md; Cylindrical features row 3, hole Ø16, axis point [-2.0, 0.0, 16.4], extent [3.0, 8.0] - name: keyLowerExitDiameter value: 14.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for keyLowerFrontCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 4, hole Ø14, axis point [-2.0, 0.0, 0.0], extent [10.361, 14.0] - name: keyLowerExitStart value: 10.361 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for keyLowerFrontCounterbore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 4, hole Ø14, axis point [-2.0, 0.0, 0.0], extent [10.361, 14.0] - name: clampCornerOuterDiameter value: 12.684 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampCornerOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampCornerAxisX value: 22.922 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampCornerOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampCenterY value: 7.0 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for clampCornerOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampCornerAxisZ value: -22.922 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for clampCornerOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampCornerStart value: -3.975 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampCornerOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampCornerEnd value: -0.975 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampCornerOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 5, hole Ø12.684, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampOuterDiameter value: 12.63 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampAxialOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 6, hole Ø12.63, axis point [25.618, 7.0, 0.0], extent [-9.0, 24.0] - name: clampAxisX value: 25.618 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampAxialOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 6, hole Ø12.63, axis point [25.618, 7.0, 0.0], extent [-9.0, 24.0] - name: clampStartZ value: -9.0 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampAxialOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 6, hole Ø12.63, axis point [25.618, 7.0, 0.0], extent [-9.0, 24.0] - name: clampEndZ value: 24.0 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampAxialOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 6, hole Ø12.63, axis point [25.618, 7.0, 0.0], extent [-9.0, 24.0] - name: keyUpperRecessDiameter value: 12.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for keyUpperBackRecess. source: sources/dimension-sheet.md; Cylindrical features row 7, hole Ø12, axis point [-2.0, 0.0, 16.4], extent [0.0, 3.0] - name: clampReliefDiameter value: 11.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampTiltOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltAxisX value: 28.665 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampTiltOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltAxisZ value: -5.054 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for clampTiltOuterCut. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltDirX value: 0.1736 unit: '' provenance: stated tolerance: 0.0002 description: Rounded axis-direction x component; normalize the vector before use. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltDirZ value: 0.9848 unit: '' provenance: stated tolerance: 0.0002 description: Rounded axis-direction z component; normalize the vector before use. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltStart value: -26.345 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampTiltOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampTiltEnd value: -4.081 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampTiltOuterCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 8, hole Ø11.5, axis point [28.665, 7.0, -5.054], extent [-26.345, -4.081] - name: clampUpperReliefX value: 28.75 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampUpperRelief. source: sources/dimension-sheet.md; Cylindrical features row 9, hole Ø11.5, axis point [28.75, 7.0, 0.0], extent [0.0, 27.506] - name: clampUpperReliefEnd value: 27.506 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampUpperRelief, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 9, hole Ø11.5, axis point [28.75, 7.0, 0.0], extent [0.0, 27.506] - name: clampOffsetDiameter value: 9.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampNearOffsetCut. source: sources/dimension-sheet.md; Cylindrical features row 10, hole Ø9.5, axis point [25.171, 5.5, 0.0], extent [-9.0, 24.0] - name: clampOffsetX value: 25.171 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampNearOffsetCut. source: sources/dimension-sheet.md; Cylindrical features row 10, hole Ø9.5, axis point [25.171, 5.5, 0.0], extent [-9.0, 24.0] - name: clampNearY value: 5.5 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for clampNearOffsetCut. source: sources/dimension-sheet.md; Cylindrical features row 10, hole Ø9.5, axis point [25.171, 5.5, 0.0], extent [-9.0, 24.0] - name: clampFarY value: 8.5 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for clampFarOffsetCut. source: sources/dimension-sheet.md; Cylindrical features row 11, hole Ø9.5, axis point [25.171, 8.5, 0.0], extent [-9.0, 24.0] - name: clampCornerOffsetDiameter value: 8.787 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampCornerNearCut. source: sources/dimension-sheet.md; Cylindrical features row 12, hole Ø8.787, axis point [22.504, 5.143, -22.504], extent [-3.975, -0.975] - name: clampCornerOffsetX value: 22.504 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampCornerNearCut. source: sources/dimension-sheet.md; Cylindrical features row 12, hole Ø8.787, axis point [22.504, 5.143, -22.504], extent [-3.975, -0.975] - name: clampCornerNearY value: 5.143 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for clampCornerNearCut. source: sources/dimension-sheet.md; Cylindrical features row 12, hole Ø8.787, axis point [22.504, 5.143, -22.504], extent [-3.975, -0.975] - name: clampCornerOffsetZ value: -22.504 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for clampCornerNearCut. source: sources/dimension-sheet.md; Cylindrical features row 12, hole Ø8.787, axis point [22.504, 5.143, -22.504], extent [-3.975, -0.975] - name: clampCornerFarY value: 8.857 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for clampCornerFarCut. source: sources/dimension-sheet.md; Cylindrical features row 13, hole Ø8.787, axis point [22.504, 8.857, -22.504], extent [-3.975, -0.975] - name: clampInnerDiameter value: 8.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampTiltNearCut. source: sources/dimension-sheet.md; Cylindrical features row 14, hole Ø8, axis point [27.777, 5.5, -4.898], extent [-19.018, -16.249] - name: clampTiltInnerX value: 27.777 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampTiltNearCut. source: sources/dimension-sheet.md; Cylindrical features row 14, hole Ø8, axis point [27.777, 5.5, -4.898], extent [-19.018, -16.249] - name: clampTiltInnerZ value: -4.898 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for clampTiltNearCut. source: sources/dimension-sheet.md; Cylindrical features row 14, hole Ø8, axis point [27.777, 5.5, -4.898], extent [-19.018, -16.249] - name: clampTiltNearStart value: -19.018 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampTiltNearCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 14, hole Ø8, axis point [27.777, 5.5, -4.898], extent [-19.018, -16.249] - name: clampTiltNearEnd value: -16.249 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampTiltNearCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 14, hole Ø8, axis point [27.777, 5.5, -4.898], extent [-19.018, -16.249] - name: clampTiltFarStart value: -23.376 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampTiltFarCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 15, hole Ø8, axis point [27.777, 8.5, -4.898], extent [-23.376, -4.407] - name: clampTiltFarEnd value: -4.407 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampTiltFarCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 15, hole Ø8, axis point [27.777, 8.5, -4.898], extent [-23.376, -4.407] - name: clampUpperInnerX value: 27.849 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for clampUpperNearCut. source: sources/dimension-sheet.md; Cylindrical features row 16, hole Ø8, axis point [27.849, 5.5, 0.0], extent [0.0, 19.625] - name: clampUpperNearEnd value: 19.625 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampUpperNearCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 16, hole Ø8, axis point [27.849, 5.5, 0.0], extent [0.0, 19.625] - name: clampUpperFarEnd value: 24.712 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for clampUpperFarCut, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 17, hole Ø8, axis point [27.849, 8.5, 0.0], extent [0.0, 24.712] - name: counterboreDiameter value: 6.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for leftPivotCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 18, hole Ø6.5, axis point [-23.92, 0.0, 0.0], extent [8.5, 14.0] - name: leftPivotX value: -23.92 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for leftPivotCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 18, hole Ø6.5, axis point [-23.92, 0.0, 0.0], extent [8.5, 14.0] - name: pivotCounterboreStart value: 8.5 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for leftPivotCounterbore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 18, hole Ø6.5, axis point [-23.92, 0.0, 0.0], extent [8.5, 14.0] - name: upperLeftScrewX value: -18.5 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for upperLeftCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 19, hole Ø6.5, axis point [-18.5, 0.0, 22.0], extent [0.0, 9.8] - name: upperLeftScrewZ value: 22.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for upperLeftCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 19, hole Ø6.5, axis point [-18.5, 0.0, 22.0], extent [0.0, 9.8] - name: longCounterboreEnd value: 9.8 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for upperLeftCounterbore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 19, hole Ø6.5, axis point [-18.5, 0.0, 22.0], extent [0.0, 9.8] - name: lowerLeftScrewX value: -17.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for lowerLeftCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 20, hole Ø6.5, axis point [-17.0, 0.0, -20.0], extent [0.0, 9.8] - name: lowerLeftScrewZ value: -20.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for lowerLeftCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 20, hole Ø6.5, axis point [-17.0, 0.0, -20.0], extent [0.0, 9.8] - name: rightPivotX value: 19.92 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for rightPivotCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 21, hole Ø6.5, axis point [19.92, 0.0, 0.0], extent [8.5, 14.0] - name: upperRightScrewX value: 20.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for upperRightCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 22, hole Ø6.5, axis point [20.0, 0.0, 17.0], extent [0.0, 7.8] - name: upperRightScrewZ value: 17.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for upperRightCounterbore. source: sources/dimension-sheet.md; Cylindrical features row 22, hole Ø6.5, axis point [20.0, 0.0, 17.0], extent [0.0, 7.8] - name: rightCounterboreEnd value: 7.8 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for upperRightCounterbore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 22, hole Ø6.5, axis point [20.0, 0.0, 17.0], extent [0.0, 7.8] - name: sideScallopDiameter value: 5.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for sideScallopBore. source: sources/dimension-sheet.md; Cylindrical features row 23, hole Ø5.5, axis point [22.088, 0.0, -15.0], extent [0.0, 4.649] - name: sideScallopX value: 22.088 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for sideScallopBore. source: sources/dimension-sheet.md; Cylindrical features row 23, hole Ø5.5, axis point [22.088, 0.0, -15.0], extent [0.0, 4.649] - name: sideScallopZ value: -15.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for sideScallopBore. source: sources/dimension-sheet.md; Cylindrical features row 23, hole Ø5.5, axis point [22.088, 0.0, -15.0], extent [0.0, 4.649] - name: sideScallopEnd value: 4.649 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for sideScallopBore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 23, hole Ø5.5, axis point [22.088, 0.0, -15.0], extent [0.0, 4.649] - name: filamentDiameter value: 4.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for filamentTransverseBore. source: sources/dimension-sheet.md; Cylindrical features row 24, hole Ø4, axis point [14.708, 0.0, 30.0], extent [0.0, 9.242] - name: filamentTransverseX value: 14.708 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for filamentTransverseBore. source: sources/dimension-sheet.md; Cylindrical features row 24, hole Ø4, axis point [14.708, 0.0, 30.0], extent [0.0, 9.242] - name: filamentZ value: 30.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for filamentTransverseBore. source: sources/dimension-sheet.md; Cylindrical features row 24, hole Ø4, axis point [14.708, 0.0, 30.0], extent [0.0, 9.242] - name: filamentTransverseEnd value: 9.242 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for filamentTransverseBore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 24, hole Ø4, axis point [14.708, 0.0, 30.0], extent [0.0, 9.242] - name: filamentEntryAxisX value: -1.248 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for filamentAngledBore. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: filamentEntryAxisY value: 3.964 unit: mm provenance: stated tolerance: 0.02 description: Axis y coordinate for filamentAngledBore. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: filamentDirX value: 0.9538 unit: '' provenance: stated tolerance: 0.0002 description: Rounded axis-direction x component; normalize the vector before use. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: filamentDirY value: 0.3003 unit: '' provenance: stated tolerance: 0.0002 description: Rounded axis-direction y component; normalize the vector before use. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: filamentEntryStart value: 20.136 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for filamentAngledBore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: filamentEntryEnd value: 24.991 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for filamentAngledBore, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 25, hole Ø4, axis point [-1.248, 3.964, 30.0], extent [20.136, 24.991] - name: upperLeftPilotDiameter value: 3.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for upperLeftPilot. Edit only the final y=10.1..14 cylinder; keep the preceding square bridge fixed. source: sources/dimension-sheet.md; Cylindrical features row 26, hole Ø3.5, axis point [-18.5, 0.0, 22.0], extent [10.1, 14.0] edit_test: delta: 0.04 expect: volume_delta: -0.8625556789696165 direction: decrease tolerance_rel: 0.03 bbox_delta: [0, 0, 0] sweep: values: [3.48, 3.5, 3.52] infeasible_deltas: [-4] - name: longPilotStart value: 10.1 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for upperLeftPilot, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 26, hole Ø3.5, axis point [-18.5, 0.0, 22.0], extent [10.1, 14.0] - name: lowerLeftPilotDiameter value: 3.5 unit: mm provenance: stated tolerance: 0.02 description: Diameter for lowerLeftPilot. Edit only the final y=10.1..14 cylinder; keep the preceding square bridge fixed. source: sources/dimension-sheet.md; Cylindrical features row 27, hole Ø3.5, axis point [-17.0, 0.0, -20.0], extent [10.1, 14.0] edit_test: delta: 0.04 expect: volume_delta: -0.8625556789696165 direction: decrease tolerance_rel: 0.03 bbox_delta: [0, 0, 0] sweep: values: [3.48, 3.5, 3.52] infeasible_deltas: [-4] - name: screwDiameter value: 3.4 unit: mm provenance: stated tolerance: 0.02 description: Diameter for leftPivotPilot. source: sources/dimension-sheet.md; Cylindrical features row 28, hole Ø3.4, axis point [-23.92, 0.0, 0.0], extent [0.0, 7.813] - name: pivotPilotEnd value: 7.813 unit: mm provenance: stated tolerance: 0.02 description: Signed end extent for leftPivotPilot, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 28, hole Ø3.4, axis point [-23.92, 0.0, 0.0], extent [0.0, 7.813] - name: leftNutX value: -22.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for leftNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 29, hole Ø3.4, axis point [-22.0, 0.0, 15.0], extent [4.6, 14.0] - name: leftNutZ value: 15.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for leftNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 29, hole Ø3.4, axis point [-22.0, 0.0, 15.0], extent [4.6, 14.0] - name: nutPilotStart value: 4.6 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for leftNutPilot, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 29, hole Ø3.4, axis point [-22.0, 0.0, 15.0], extent [4.6, 14.0] - name: lugNutX value: 8.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for lugNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 30, hole Ø3.4, axis point [8.0, 0.0, 28.0], extent [4.6, 14.0] - name: lugNutZ value: 28.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for lugNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 30, hole Ø3.4, axis point [8.0, 0.0, 28.0], extent [4.6, 14.0] - name: lowerNutX value: 12.0 unit: mm provenance: stated tolerance: 0.02 description: Axis x coordinate for lowerNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 31, hole Ø3.4, axis point [12.0, 0.0, -17.0], extent [4.6, 14.0] - name: lowerNutZ value: -17.0 unit: mm provenance: stated tolerance: 0.02 description: Axis z coordinate for lowerNutPilot. source: sources/dimension-sheet.md; Cylindrical features row 31, hole Ø3.4, axis point [12.0, 0.0, -17.0], extent [4.6, 14.0] - name: rightPilotStart value: 8.1 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for upperRightPilot, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 33, hole Ø3.4, axis point [20.0, 0.0, 17.0], extent [8.1, 14.0] - name: upperLeftBossDiameter value: 11.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for upperLeftBoss. source: sources/dimension-sheet.md; Cylindrical features row 34, pin Ø11, axis point [-18.5, 0.0, 22.0], extent [8.0, 14.0] - name: lugBossDiameter value: 10.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for lugBoss. source: sources/dimension-sheet.md; Cylindrical features row 35, pin Ø10, axis point [8.0, 0.0, 28.0], extent [0.0, 14.0] - name: clampCornerLipDiameter value: 9.184 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampCornerLip. source: sources/dimension-sheet.md; Cylindrical features row 36, pin Ø9.184, axis point [22.922, 7.0, -22.922], extent [-3.975, -0.975] - name: clampAxialLipDiameter value: 9.13 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampAxialLip. source: sources/dimension-sheet.md; Cylindrical features row 37, pin Ø9.13, axis point [25.618, 7.0, 0.0], extent [-9.0, 24.0] - name: clampFarLipDiameter value: 6.0 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampFarLip. source: sources/dimension-sheet.md; Cylindrical features row 38, pin Ø6, axis point [25.171, 8.5, 0.0], extent [-8.242, 24.0] - name: clampFarLipStart value: -8.242 unit: mm provenance: stated tolerance: 0.02 description: Signed start extent for clampFarLip, from the stated axis point. source: sources/dimension-sheet.md; Cylindrical features row 38, pin Ø6, axis point [25.171, 8.5, 0.0], extent [-8.242, 24.0] - name: clampCornerOffsetLipDiameter value: 5.287 unit: mm provenance: stated tolerance: 0.02 description: Diameter for clampCornerNearLip. source: sources/dimension-sheet.md; Cylindrical features row 39, pin Ø5.287, axis point [22.504, 5.143, -22.504], extent [-3.975, -0.975] - name: nutLeftFlatX value: -24.8 unit: mm provenance: stated tolerance: 0.02 description: Left x flat of the trap centered at x=-22. source: sources/dimension-sheet.md; +x face at x=-24.8 - name: nutRightFlatX value: -19.2 unit: mm provenance: stated tolerance: 0.02 description: Right x flat of the trap centered at x=-22. source: sources/dimension-sheet.md; -x face at x=-19.2 - name: nutFullDepth value: 4 unit: mm provenance: stated tolerance: 0.02 description: First support ledges stop the hex corner regions. source: sources/dimension-sheet.md; six -y faces at y=4 - name: nutRectEnd value: 4.3 unit: mm provenance: stated tolerance: 0.02 description: Second support ledges end the rectangular bridge. source: sources/dimension-sheet.md; six -y faces at y=4.3 - name: longCounterboreFullDepth value: 9.5 unit: mm provenance: stated tolerance: 0.02 description: Circular recess depth before support steps at the two left screws. source: sources/dimension-sheet.md; four -y faces at y=9.5 - name: rightCounterboreFullDepth value: 7.5 unit: mm provenance: stated tolerance: 0.02 description: Circular recess depth before support steps at (20,17). source: sources/dimension-sheet.md; two -y faces at y=7.5 - name: nutAcrossFlats value: 5.6 unit: mm provenance: derived tolerance: 0.03 description: Common width of the three point-up hex nut traps. formula: nutRightFlatX - nutLeftFlatX - name: nutCornerRadius value: 3.2331615074619044 unit: mm provenance: derived tolerance: 0.03 description: Hex circumradius. formula: nutAcrossFlats / sqrt(3) - name: bridgeLayerHeight value: 0.3 unit: mm provenance: derived tolerance: 0.03 description: Printable bridge increment; no equality lock between independent dimensions. formula: nutRectEnd - nutFullDepth - name: lowerTransitionLength value: 7.361 unit: mm provenance: derived tolerance: 0.03 description: Lower keyhole tapered length. formula: keyLowerExitStart - keyBackDepth - name: longPilotLength value: 3.9 unit: mm provenance: derived tolerance: 0.03 description: Straight pilot length used by the diameter edit tests. formula: plateThickness - longPilotStart - name: pivotMouthDiameter value: 3.9 unit: mm provenance: measured tolerance: 0.15 description: Raster diameter of the tapered pivot-pilot mouth at y=8.5. source: sources/section-z0.png; v≈286, right pilot edges u≈1385 and1479; 24 px/mm features: - id: housingEnvelope kind: extrude description: One constructed plate, lower left foot, upper lug and rear web. The blockout and finished part both reach the full envelope, including z=33.72. parameters: [plateWidth, plateThickness, bottomZ, lugMaxZ, bodyTopZ, leftTopChamferZ, rightTopChamferX, leftFootX, leftShoulderZ, leftDiagonalAnchorX, leftDiagonalAnchorZ, rightBottomChamferZ, halfWidth, overallHeight, leftKneeX, leftKneeZ, leftFootTopZ, lugWebPeakX] count: 1 verify: - method: bbox - method: solid points: - [-10, 7, -25] - [-24, 6, -10] - [8, 7, 31] note: Core material, with millimetres of clearance from raster-inferred boundaries. - method: dimension dimension: overallWidth - method: dimension dimension: overallThickness - method: dimension dimension: overallHeight - id: keyUpperFrontCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 1; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [keyUpperCounterboreDiameter, keyAxisX, keyUpperZ, keyMiddleEnd, plateThickness] count: 1 verify: - method: cylinder cylinder: keyUpperFrontCounterbore - id: keyLowerBackRecess kind: hole description: Stated in dimension-sheet.md cylindrical row 2; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [keyLowerRecessDiameter, keyAxisX, keyBackDepth] count: 1 verify: - method: cylinder cylinder: keyLowerBackRecess - id: keyUpperMiddleBore kind: hole description: Stated in dimension-sheet.md cylindrical row 3; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [keyUpperBoreDiameter, keyAxisX, keyUpperZ, keyBackDepth, keyMiddleEnd] count: 1 verify: - method: cylinder cylinder: keyUpperMiddleBore - id: keyLowerFrontCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 4; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [keyLowerExitDiameter, keyAxisX, keyLowerExitStart, plateThickness] count: 1 verify: - method: cylinder cylinder: keyLowerFrontCounterbore - id: clampCornerOuterCut kind: hole description: Stated in dimension-sheet.md cylindrical row 5; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerOuterDiameter, clampCornerAxisX, clampCenterY, clampCornerAxisZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerOuterCut - id: clampAxialOuterCut kind: hole description: Stated in dimension-sheet.md cylindrical row 6; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampOuterDiameter, clampAxisX, clampCenterY, clampStartZ, clampEndZ] count: 1 verify: - method: cylinder cylinder: clampAxialOuterCut - id: keyUpperBackRecess kind: hole description: Stated in dimension-sheet.md cylindrical row 7; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [keyUpperRecessDiameter, keyAxisX, keyUpperZ, keyBackDepth] count: 1 verify: - method: cylinder cylinder: keyUpperBackRecess - id: clampTiltOuterCut kind: hole description: Stated in dimension-sheet.md cylindrical row 8; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampReliefDiameter, clampTiltAxisX, clampCenterY, clampTiltAxisZ, clampTiltDirX, clampTiltDirZ, clampTiltStart, clampTiltEnd] count: 1 verify: - method: cylinder cylinder: clampTiltOuterCut - id: clampUpperRelief kind: hole description: Stated in dimension-sheet.md cylindrical row 9; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampReliefDiameter, clampUpperReliefX, clampCenterY, clampUpperReliefEnd] count: 1 verify: - method: cylinder cylinder: clampUpperRelief - id: clampNearOffsetCut kind: hole description: Stated in dimension-sheet.md cylindrical row 10; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampOffsetDiameter, clampOffsetX, clampNearY, clampStartZ, clampEndZ] count: 1 verify: - method: cylinder cylinder: clampNearOffsetCut - id: clampFarOffsetCut kind: hole description: Stated in dimension-sheet.md cylindrical row 11; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampOffsetDiameter, clampOffsetX, clampFarY, clampStartZ, clampEndZ] count: 1 verify: - method: cylinder cylinder: clampFarOffsetCut - id: clampCornerNearCut kind: hole description: Stated in dimension-sheet.md cylindrical row 12; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerOffsetDiameter, clampCornerOffsetX, clampCornerNearY, clampCornerOffsetZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerNearCut - id: clampCornerFarCut kind: hole description: Stated in dimension-sheet.md cylindrical row 13; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerOffsetDiameter, clampCornerOffsetX, clampCornerFarY, clampCornerOffsetZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerFarCut - id: clampTiltNearCut kind: hole description: Stated in dimension-sheet.md cylindrical row 14; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampInnerDiameter, clampTiltInnerX, clampNearY, clampTiltInnerZ, clampTiltDirX, clampTiltDirZ, clampTiltNearStart, clampTiltNearEnd] count: 1 verify: - method: cylinder cylinder: clampTiltNearCut - id: clampTiltFarCut kind: hole description: Stated in dimension-sheet.md cylindrical row 15; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampInnerDiameter, clampTiltInnerX, clampFarY, clampTiltInnerZ, clampTiltDirX, clampTiltDirZ, clampTiltFarStart, clampTiltFarEnd] count: 1 verify: - method: cylinder cylinder: clampTiltFarCut - id: clampUpperNearCut kind: hole description: Stated in dimension-sheet.md cylindrical row 16; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampInnerDiameter, clampUpperInnerX, clampNearY, clampUpperNearEnd] count: 1 verify: - method: cylinder cylinder: clampUpperNearCut - id: clampUpperFarCut kind: hole description: Stated in dimension-sheet.md cylindrical row 17; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampInnerDiameter, clampUpperInnerX, clampFarY, clampUpperFarEnd] count: 1 verify: - method: cylinder cylinder: clampUpperFarCut - id: leftPivotCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 18; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [counterboreDiameter, leftPivotX, pivotCounterboreStart, plateThickness] count: 1 verify: - method: cylinder cylinder: leftPivotCounterbore - id: upperLeftCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 19; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [counterboreDiameter, upperLeftScrewX, upperLeftScrewZ, longCounterboreEnd] count: 1 verify: - method: cylinder cylinder: upperLeftCounterbore - id: lowerLeftCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 20; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [counterboreDiameter, lowerLeftScrewX, lowerLeftScrewZ, longCounterboreEnd] count: 1 verify: - method: cylinder cylinder: lowerLeftCounterbore - id: rightPivotCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 21; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [counterboreDiameter, rightPivotX, pivotCounterboreStart, plateThickness] count: 1 verify: - method: cylinder cylinder: rightPivotCounterbore - id: upperRightCounterbore kind: hole description: Stated in dimension-sheet.md cylindrical row 22; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [counterboreDiameter, upperRightScrewX, upperRightScrewZ, rightCounterboreEnd] count: 1 verify: - method: cylinder cylinder: upperRightCounterbore - id: sideScallopBore kind: hole description: Stated in dimension-sheet.md cylindrical row 23; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [sideScallopDiameter, sideScallopX, sideScallopZ, sideScallopEnd] count: 1 verify: - method: cylinder cylinder: sideScallopBore - id: filamentTransverseBore kind: hole description: Stated in dimension-sheet.md cylindrical row 24; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [filamentDiameter, filamentTransverseX, filamentZ, filamentTransverseEnd] count: 1 verify: - method: cylinder cylinder: filamentTransverseBore - id: filamentAngledBore kind: hole description: Stated in dimension-sheet.md cylindrical row 25; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [filamentDiameter, filamentEntryAxisX, filamentEntryAxisY, filamentZ, filamentDirX, filamentDirY, filamentEntryStart, filamentEntryEnd] count: 1 verify: - method: cylinder cylinder: filamentAngledBore - id: upperLeftPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 26; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [upperLeftPilotDiameter, upperLeftScrewX, upperLeftScrewZ, longPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: upperLeftPilot - id: lowerLeftPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 27; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [lowerLeftPilotDiameter, lowerLeftScrewX, lowerLeftScrewZ, longPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: lowerLeftPilot - id: leftPivotPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 28; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, leftPivotX, pivotPilotEnd] count: 1 verify: - method: cylinder cylinder: leftPivotPilot - id: leftNutPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 29; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, leftNutX, leftNutZ, nutPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: leftNutPilot - id: lugNutPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 30; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, lugNutX, lugNutZ, nutPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: lugNutPilot - id: lowerNutPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 31; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, lowerNutX, lowerNutZ, nutPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: lowerNutPilot - id: rightPivotPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 32; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, rightPivotX, pivotPilotEnd] count: 1 verify: - method: cylinder cylinder: rightPivotPilot - id: upperRightPilot kind: hole description: Stated in dimension-sheet.md cylindrical row 33; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [screwDiameter, upperRightScrewX, upperRightScrewZ, rightPilotStart, plateThickness] count: 1 verify: - method: cylinder cylinder: upperRightPilot - id: upperLeftBoss kind: boss description: Stated in dimension-sheet.md cylindrical row 34; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [upperLeftBossDiameter, upperLeftScrewX, upperLeftScrewZ, keyMiddleEnd, plateThickness] count: 1 verify: - method: cylinder cylinder: upperLeftBoss - id: lugBoss kind: boss description: Stated in dimension-sheet.md cylindrical row 35; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [lugBossDiameter, lugNutX, lugNutZ, plateThickness] count: 1 verify: - method: cylinder cylinder: lugBoss - id: clampCornerLip kind: boss description: Stated in dimension-sheet.md cylindrical row 36; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerLipDiameter, clampCornerAxisX, clampCenterY, clampCornerAxisZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerLip - id: clampAxialLip kind: boss description: Stated in dimension-sheet.md cylindrical row 37; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampAxialLipDiameter, clampAxisX, clampCenterY, clampStartZ, clampEndZ] count: 1 verify: - method: cylinder cylinder: clampAxialLip - id: clampFarLip kind: boss description: Stated in dimension-sheet.md cylindrical row 38; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampFarLipDiameter, clampOffsetX, clampFarY, clampFarLipStart, clampEndZ] count: 1 verify: - method: cylinder cylinder: clampFarLip - id: clampCornerNearLip kind: boss description: Stated in dimension-sheet.md cylindrical row 39; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerOffsetLipDiameter, clampCornerOffsetX, clampCornerNearY, clampCornerOffsetZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerNearLip - id: clampCornerFarLip kind: boss description: Stated in dimension-sheet.md cylindrical row 40; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. parameters: [clampCornerOffsetLipDiameter, clampCornerOffsetX, clampCornerFarY, clampCornerOffsetZ, clampCornerStart, clampCornerEnd] count: 1 verify: - method: cylinder cylinder: clampCornerFarLip - id: keyholeTaperAndNeck kind: loft description: 'Provisional table-and-section interpretation: lower Ø22.5 at y=0..3 tapers to Ø14 at y=10.361; Ø14 continues to y=14. Upper stack Ø12/Ø16/Ø26. Two inclined neck walls connect the openings. No separate lower Ø16 cylindrical surface is supported by the table.' parameters: [keyAxisX, keyUpperZ, keyLowerRecessDiameter, keyLowerExitDiameter, keyBackDepth, keyLowerExitStart, lowerTransitionLength] verify: - method: plane plane: keyNeckLeft - method: plane plane: keyNeckRight - method: section section: midPlate - method: section section: keyholeDepthSection - method: section section: pivotDepthSection - method: section section: upperBoreDepthSection - method: void points: - [-2, 1.5, 0] - [-2, 7, 0] - [-2, 12, 0] - [-2, 1.5, 16.4] - [-2, 5.5, 16.4] - [-2, 11, 16.4] - [-2, 7, 8] note: Both axes and the connecting neck; no probe close to an inferred wall. - id: fastenerBridgesAndNutTraps kind: pocket description: 'Three point-up hex traps at (-22,15),(8,28),(12,-17). Hex corner ledges y=4, rectangular support end y=4.3, square support end/pilot start y=4.6. Left counterbores: support steps y=9.5/9.8/10.1. Upper-right: y=7.5/7.8/8.1. Six Ø3.4 pilots and two Ø3.5 pilots. Retain printable bridges rather than substituting smooth conical counterbores.' parameters: [nutLeftFlatX, nutRightFlatX, nutAcrossFlats, nutCornerRadius, nutFullDepth, nutRectEnd, nutPilotStart, bridgeLayerHeight, longCounterboreFullDepth, longCounterboreEnd, longPilotStart, longPilotLength, rightCounterboreFullDepth, rightCounterboreEnd, rightPilotStart] count: 3 verify: - method: dimension dimension: nutTrapWidth - method: section section: backPocketSection - method: section section: frontPocketSection - method: section section: leftScrewDepthSection - method: section section: lowerScrewClampSection - method: void points: - [-22, 2, 15] - [8, 2, 28] - [12, 2, -17] - [-18.5, 12, 22] - [-17, 12, -20] - [20, 11, 17] note: Axes of nut cavities/pilots, at least 1.7 mm from nominal radial walls. - id: pivotTransitionsAndOpenSlot kind: cut description: Short tapered mouths y=7.813..8.5 join Ø3.4 pivot pilots to Ø6.5 counterbore shoulders. The left counterbore is open to x=-26.5 through a z=±3.25 slot. Mouth Ø3.9 is raster measured, not an assumed standard size. parameters: [pivotPilotEnd, pivotCounterboreStart, pivotMouthDiameter, counterboreDiameter, screwDiameter, leftPivotX, rightPivotX] verify: - method: face face: leftPivotShoulder - method: face face: rightPivotShoulder - method: face face: leftPivotSlotBottom - method: face face: leftPivotSlotTop - method: section section: pivotDepthSection - method: void points: - [-23.92, 4, 0] - [19.92, 4, 0] note: Pilot centers; no near-mouth probes imposed. - id: functionalPlanarFaces kind: profile description: All non-typographic functional rows from the supplied axis-aligned face table. Repeated faces have individual centers. Only backDatum intentionally sums coplanar contact material. parameters: [plateThickness, bodyTopZ, bottomZ, halfWidth, nutAcrossFlats] verify: - method: face face: leftDatum - method: face face: leftNutFlatLeft - method: face face: leftNutBridgeLeft - method: face face: leftFootSide - method: face face: leftNutBridgeRight - method: face face: upperLeftBridgeLeft - method: face face: leftNutFlatRight - method: face face: lowerLeftBridgeLeft - method: face face: upperLeftBridgeRight - method: face face: lowerLeftBridgeRight - method: face face: lugNutFlatLeft - method: face face: lugNutBridgeLeft - method: face face: lowerNutFlatLeft - method: face face: lugNutBridgeRight - method: face face: lowerNutBridgeLeft - method: face face: lugNutFlatRight - method: face face: lowerNutBridgeRight - method: face face: lowerNutFlatRight - method: face face: upperRightBridgeLeft - method: face face: upperRightBridgeRight - method: face face: sideScallopEndFace - method: face face: clampLowerSideFace - method: face face: clampUpperSideFace - method: face face: rightSideFrontPanel - method: face face: rightSideBackPanel - method: face face: backDatum - method: face face: clampCornerBackLedge - method: face face: clampCornerPocketFloor - method: face face: clampUpperBackFloor - method: face face: clampLowerBackFloor - method: face face: keyUpperBackShoulder - method: face face: lowerNutTopLedge - method: face face: leftNutBottomLedge - method: face face: leftNutTopLedge - method: face face: lugNutTopLedge - method: face face: lowerNutBottomLedge - method: face face: lugNutBottomLedge - method: face face: lugNutLeftLedge - method: face face: leftNutLeftLedge - method: face face: lugNutRightLedge - method: face face: leftNutRightLedge - method: face face: lowerNutLeftLedge - method: face face: lowerNutRightLedge - method: face face: upperRightTopLedge - method: face face: upperRightBottomLedge - method: face face: upperRightLeftLedge - method: face face: upperRightRightLedge - method: face face: keyUpperFrontShoulder - method: face face: leftPivotShoulder - method: face face: rightPivotShoulder - method: face face: upperLeftTopLedge - method: face face: lowerLeftTopLedge - method: face face: lowerLeftBottomLedge - method: face face: upperLeftBottomLedge - method: face face: lowerLeftRightLedge - method: face face: upperLeftRightLedge - method: face face: upperLeftLeftLedge - method: face face: lowerLeftLeftLedge - method: face face: clampCornerFrontLedge - method: face face: clampCornerFrontFloor - method: face face: clampLowerFrontFloor - method: face face: clampUpperFrontFloor - method: face face: frontDatum - method: face face: bottomDatum - method: face face: lowerLeftBridgeBottom - method: face face: lowerNutBridgeBottom - method: face face: lowerLeftBridgeTop - method: face face: lowerNutBridgeTop - method: face face: clampLowerSlotBottom - method: face face: clampLowerSlotTop - method: face face: clampLowerBackStep - method: face face: leftPivotSlotBottom - method: face face: leftPivotSlotTop - method: face face: leftNutBridgeBottom - method: face face: upperRightBridgeBottom - method: face face: leftNutBridgeTop - method: face face: upperRightBridgeTop - method: face face: clampUpperBackStep - method: face face: upperLeftBridgeBottom - method: face face: clampUpperSlotBottom - method: face face: upperLeftBridgeTop - method: face face: upperLeftBossLedge - method: face face: clampUpperSlotTop - method: face face: clampUpperBackRim - method: face face: lugNutBridgeBottom - method: face face: topLeftLedge - method: face face: topRightLedge - method: face face: lugNutBridgeTop - method: dimension dimension: matingFaceSeparation - method: dimension dimension: leftFootOffset - method: dimension dimension: upperRecessDepth - method: dimension dimension: upperBoreLength - method: dimension dimension: upperCounterboreDepth - method: dimension dimension: pivotCounterboreDepth - method: dimension dimension: nutTrapWidth - method: dimension dimension: lowerClampSlotHeight - method: dimension dimension: upperClampSlotHeight - id: inclinedFunctionalWalls kind: chamfer description: Stated perimeter bevels, keyhole necks, hex flats and clamp slot planes; normalized document normals determine their orientations. parameters: [leftTopChamferZ, rightTopChamferX, leftShoulderZ, leftDiagonalAnchorX, leftDiagonalAnchorZ, rightBottomChamferZ, nutAcrossFlats] verify: - method: plane plane: leftLowerBevel - method: plane plane: leftUpperBevel - method: plane plane: rightUpperBevel - method: plane plane: clampTiltWall - method: plane plane: clampCornerUpperWall - method: plane plane: leftShallowBevel - method: plane plane: clampCornerLowerWall - method: plane plane: keyNeckLeft - method: plane plane: keyNeckRight - method: plane plane: upperLeftBossBevel - method: plane plane: rightLowerBevel - method: plane plane: lugHexUpperRight - method: plane plane: leftHexUpperLeft - method: plane plane: lugHexLowerLeft - method: plane plane: leftHexUpperRight - method: plane plane: lowerHexLowerLeft - method: plane plane: lugHexLowerRight - method: plane plane: lowerHexLowerRight - method: plane plane: lowerHexUpperRight - method: plane plane: leftHexLowerLeft - method: plane plane: leftHexLowerRight - method: plane plane: lugHexUpperLeft - method: plane plane: lowerHexUpperLeft - method: plane plane: clampCornerBackBevel - method: plane plane: clampCornerBottomWall - id: clampSlotsAndSteppedChannel kind: channel description: Partial axial, tilted and 45-degree cut surfaces and retaining lips on +x. Slots at z=-9..-6 and z=21..24, plus the diagonal lower slot. A full tube cut would destroy the half-clamp. parameters: [clampCornerOuterDiameter, clampCornerAxisX, clampCenterY, clampCornerAxisZ, clampCornerStart, clampCornerEnd, clampOuterDiameter, clampAxisX, clampStartZ, clampEndZ, clampReliefDiameter, clampTiltAxisX, clampTiltAxisZ, clampTiltDirX, clampTiltDirZ, clampTiltStart, clampTiltEnd, clampUpperReliefX, clampUpperReliefEnd, clampOffsetDiameter, clampOffsetX, clampNearY, clampFarY, clampCornerOffsetDiameter, clampCornerOffsetX, clampCornerNearY, clampCornerOffsetZ, clampCornerFarY, clampInnerDiameter, clampTiltInnerX, clampTiltInnerZ, clampTiltNearStart, clampTiltNearEnd, clampTiltFarStart, clampTiltFarEnd, clampUpperInnerX, clampUpperNearEnd, clampUpperFarEnd, clampCornerLipDiameter, clampAxialLipDiameter, clampFarLipDiameter, clampFarLipStart, clampCornerOffsetLipDiameter] verify: - method: section section: midPlate - method: section section: lowerScrewClampSection - method: section section: upperBoreDepthSection - method: dimension dimension: lowerClampSlotHeight - method: dimension dimension: upperClampSlotHeight - id: sectionTopology kind: other description: Eight material sections check connectivity, holes, supports and channels; x=-18.5 loop-count conflict remains Q3. parameters: [plateThickness] verify: - method: section section: midPlate - method: section section: backPocketSection - method: section section: frontPocketSection - method: section section: keyholeDepthSection - method: section section: leftScrewDepthSection - method: section section: pivotDepthSection - method: section section: upperBoreDepthSection - method: section section: lowerScrewClampSection - method: count section: midPlate count: 1 note: Outer material loops only; its 11 holes are checked by SectionExpect.holes. - id: fanDuctBlend kind: fillet description: Optional organic fan-duct lobe and blends near +x,z≈-15. Named bores, lips and datums remain required; no invented blend radius. optional: true parameters: [] verify: - method: bbox note: Checks shared-envelope retention only; not validation of the cosmetic outline, font or fillet radius. - id: topLugFillet kind: fillet description: Optional top-lug/web fillet. Retain Ø10 lug and the highest point z=33.72. optional: true parameters: [lugMaxZ, lugWebPeakX] verify: - method: bbox note: Checks shared-envelope retention only; not validation of the cosmetic outline, font or fillet radius. - id: r1Marking kind: other description: Optional R1 marking on the y=0 side. Exact font and relief sign are unresolved; prose says embossed while sections show recesses. optional: true parameters: [] verify: - method: bbox note: Checks shared-envelope retention only; not validation of the cosmetic outline, font or fillet radius. - id: directionArrow kind: other description: Optional arrow near x≈-17,z≈-26.65 on y=0. Exact outline and depth are not invented. optional: true parameters: [] verify: - method: bbox note: Checks shared-envelope retention only; not validation of the cosmetic outline, font or fillet radius. interfaces: - name: backMatingDatum description: Datum A, y=0 outward -y; intentionally combined contact area across coplanar islands. must_not_change: true checks: [backDatum, matingFaceSeparation] - name: frontFaceDatum description: Datum B, y=14 outward +y, irrespective of image filenames. must_not_change: true checks: [frontDatum, matingFaceSeparation] - name: bottomMountingDatum description: Datum C, z=-30 outward -z. must_not_change: true checks: [bottomDatum, overallHeight] - name: leftLocatingDatum description: Datum D, x=-26.5 outward -x. must_not_change: true checks: [leftDatum, overallWidth, leftFootOffset] - name: rightClampFaces description: Separated +x contact patches and channel slots. must_not_change: true checks: [rightSideFrontPanel, rightSideBackPanel, clampLowerSideFace, clampUpperSideFace, sideScallopBore, lowerClampSlotHeight, upperClampSlotHeight] - name: keyholeAssembly description: Provisional detailed-table interpretation; preserve Q1. must_not_change: true checks: [keyUpperFrontCounterbore, keyLowerBackRecess, keyUpperMiddleBore, keyLowerFrontCounterbore, keyUpperBackRecess, keyUpperBackShoulder, keyUpperFrontShoulder, keyNeckLeft, keyNeckRight, upperRecessDepth, upperBoreLength, upperCounterboreDepth, midPlate] - name: fastenerPattern description: Eight screw axes, five Ø6.5 counterbores, three hex traps and two surrounding bosses. must_not_change: true checks: [leftPivotCounterbore, upperLeftCounterbore, lowerLeftCounterbore, rightPivotCounterbore, upperRightCounterbore, upperLeftPilot, lowerLeftPilot, leftPivotPilot, leftNutPilot, lugNutPilot, lowerNutPilot, rightPivotPilot, upperRightPilot, upperLeftBoss, lugBoss, nutTrapWidth, pivotCounterboreDepth, leftScrewDepthSection] - name: filamentPath description: Both Ø4 passages, including the angled entry. must_not_change: true checks: [filamentTransverseBore, filamentAngledBore] - name: hotendHalfClamp description: All documented partial cuts and convex lips, including axial, tilted and 45-degree segments. must_not_change: true checks: [clampCornerOuterCut, clampAxialOuterCut, clampTiltOuterCut, clampUpperRelief, clampNearOffsetCut, clampFarOffsetCut, clampCornerNearCut, clampCornerFarCut, clampTiltNearCut, clampTiltFarCut, clampUpperNearCut, clampUpperFarCut, clampCornerLip, clampAxialLip, clampFarLip, clampCornerNearLip, clampCornerFarLip, clampTiltWall, clampCornerUpperWall, clampCornerLowerWall, upperBoreDepthSection, lowerScrewClampSection] acceptance: bbox_tolerance: 0.03 volume: null surface_area: null center_of_mass: null solid_count: 1 sections: - id: midPlate plane: y at: 7.0 expect: area: 2186.59 area_tolerance_rel: 0.01 loops: 1 holes: 11 description: 'Stated table section y = 7.0: solid area 2186.59 mm2, 1 outer loops, 11 holes.' - id: backPocketSection plane: y at: 1.5 expect: area: 2203.29 area_tolerance_rel: 0.01 loops: 1 holes: 9 description: 'Stated table section y = 1.5: solid area 2203.29 mm2, 1 outer loops, 9 holes.' - id: frontPocketSection plane: y at: 12.0 expect: area: 2148.31 area_tolerance_rel: 0.01 loops: 1 holes: 7 description: 'Stated table section y = 12.0: solid area 2148.31 mm2, 1 outer loops, 7 holes.' - id: keyholeDepthSection plane: x at: 0.0 expect: area: 333.46 area_tolerance_rel: 0.01 loops: 2 holes: 0 description: 'Stated table section x = 0.0: solid area 333.46 mm2, 2 outer loops, 0 holes.' - id: leftScrewDepthSection plane: x at: -18.5 expect: area: 662.84 area_tolerance_rel: 0.01 loops: 3 holes: 0 description: 'Stated table section x = -18.5: solid area 662.84 mm2, 3 outer loops, 0 holes. Mesh drawing title instead says two regions; unresolved Q3, draft uses table topology.' - id: pivotDepthSection plane: z at: 0.0 expect: area: 336.53 area_tolerance_rel: 0.01 loops: 4 holes: 0 description: 'Stated table section z = 0.0: solid area 336.53 mm2, 4 outer loops, 0 holes.' - id: upperBoreDepthSection plane: z at: 17.0 expect: area: 355.45 area_tolerance_rel: 0.01 loops: 4 holes: 0 description: 'Stated table section z = 17.0: solid area 355.45 mm2, 4 outer loops, 0 holes.' - id: lowerScrewClampSection plane: z at: -20.0 expect: area: 584.6 area_tolerance_rel: 0.01 loops: 2 holes: 1 description: 'Stated table section z = -20.0: solid area 584.6 mm2, 2 outer loops, 1 holes.' faces: - name: leftDatum plane: x at: -26.5 normal: '-' area: 607.2 area_tolerance_rel: 0.01 tolerance: 0.05 mode: sum - name: leftNutFlatLeft plane: x at: -24.8 normal: + area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftNutBridgeLeft plane: x at: -23.7 normal: + area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftFootSide plane: x at: -21.95 normal: '-' area: 76.48 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftNutBridgeRight plane: x at: -20.3 normal: '-' area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperLeftBridgeLeft plane: x at: -20.25 normal: + area: 1.05 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftNutFlatRight plane: x at: -19.2 normal: '-' area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerLeftBridgeLeft plane: x at: -18.75 normal: + area: 1.05 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperLeftBridgeRight plane: x at: -16.75 normal: '-' area: 1.05 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerLeftBridgeRight plane: x at: -15.25 normal: '-' area: 1.05 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lugNutFlatLeft plane: x at: 5.2 normal: + area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lugNutBridgeLeft plane: x at: 6.3 normal: + area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutFlatLeft plane: x at: 9.2 normal: + area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lugNutBridgeRight plane: x at: 9.7 normal: '-' area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutBridgeLeft plane: x at: 10.3 normal: + area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lugNutFlatRight plane: x at: 10.8 normal: '-' area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutBridgeRight plane: x at: 13.7 normal: '-' area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutFlatRight plane: x at: 14.8 normal: '-' area: 13.9 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperRightBridgeLeft plane: x at: 18.3 normal: + area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperRightBridgeRight plane: x at: 21.7 normal: '-' area: 1.02 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: sideScallopEndFace plane: x at: 23.14 normal: + area: 7.41 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampLowerSideFace plane: x at: 24.0 normal: + area: 12.89 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [1.11, -8.23] - name: clampUpperSideFace plane: x at: 24.0 normal: + area: 10.2 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [1.12, 22.5] - name: rightSideFrontPanel plane: x at: 26.5 normal: + area: 64.91 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [13.24, 2.77] - name: rightSideBackPanel plane: x at: 26.5 normal: + area: 41.94 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [0.86, 7.53] - name: rightSideFacesTotal plane: x at: 26.5 normal: + area: 106.85 area_tolerance_rel: 0.15 tolerance: 0.1 mode: sum - name: backDatum plane: y at: 0 normal: '-' area: 2166.04 area_tolerance_rel: 0.03 tolerance: 0.05 mode: sum - name: clampCornerBackLedge plane: y at: 0.75 normal: + area: 1.5 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampCornerPocketFloor plane: y at: 2.5 normal: '-' area: 6.1 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampUpperBackFloor plane: y at: 2.731 normal: '-' area: 5.16 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [24.45, 22.5] - name: clampLowerBackFloor plane: y at: 2.731 normal: '-' area: 1.76 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [24.24, -6.26] - name: keyUpperBackShoulder plane: y at: 3.0 normal: + area: 66.24 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutTopLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [12, -14.79] - name: leftNutBottomLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-22, 12.79] - name: leftNutTopLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-22, 17.21] - name: lugNutTopLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [8, 30.21] - name: lowerNutBottomLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [12, -19.21] - name: lugNutBottomLedge plane: y at: 4.0 normal: '-' area: 4.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [8, 25.79] - name: lugNutLeftLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [5.75, 28] - name: leftNutLeftLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-24.25, 15] - name: lugNutRightLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [10.25, 28] - name: leftNutRightLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-19.75, 15] - name: lowerNutLeftLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [9.75, -17] - name: lowerNutRightLedge plane: y at: 4.3 normal: '-' area: 3.73 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [14.25, -17] - name: upperRightTopLedge plane: y at: 7.5 normal: '-' area: 6.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [20, 19.33] - name: upperRightBottomLedge plane: y at: 7.5 normal: '-' area: 6.07 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [20, 14.67] - name: upperRightLeftLedge plane: y at: 7.8 normal: '-' area: 4.74 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [17.6, 17] - name: upperRightRightLedge plane: y at: 7.8 normal: '-' area: 4.46 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [22.36, 17] - name: keyUpperFrontShoulder plane: y at: 8.0 normal: + area: 286.25 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftPivotShoulder plane: y at: 8.5 normal: + area: 21.41 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-23.86, 0] - name: rightPivotShoulder plane: y at: 8.5 normal: + area: 21.24 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [19.92, 0] - name: upperLeftTopLedge plane: y at: 9.5 normal: '-' area: 5.79 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-18.5, 24.36] - name: lowerLeftTopLedge plane: y at: 9.5 normal: '-' area: 5.79 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-17, -17.64] - name: lowerLeftBottomLedge plane: y at: 9.5 normal: '-' area: 5.79 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-17, -22.36] - name: upperLeftBottomLedge plane: y at: 9.5 normal: '-' area: 5.79 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-18.5, 19.64] - name: lowerLeftRightLedge plane: y at: 9.8 normal: '-' area: 4.67 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-14.57, -20] - name: upperLeftRightLedge plane: y at: 9.8 normal: '-' area: 4.67 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-16.07, 22] - name: upperLeftLeftLedge plane: y at: 9.8 normal: '-' area: 4.67 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-20.93, 22] - name: lowerLeftLeftLedge plane: y at: 9.8 normal: '-' area: 4.67 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-19.43, -20] - name: clampCornerFrontLedge plane: y at: 11.5 normal: + area: 3.21 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampCornerFrontFloor plane: y at: 13.25 normal: '-' area: 9.0 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [21.81, -25.31] - name: clampLowerFrontFloor plane: y at: 13.25 normal: '-' area: 3.99 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [25.84, -7.5] - name: clampUpperFrontFloor plane: y at: 13.25 normal: '-' area: 3.99 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [25.84, 22.5] - name: frontDatum plane: y at: 14.0 normal: + area: 2279.29 area_tolerance_rel: 0.03 tolerance: 0.05 mode: sum - name: bottomDatum plane: z at: -30.0 normal: '-' area: 573.52 area_tolerance_rel: 0.02 tolerance: 0.05 mode: sum - name: lowerLeftBridgeBottom plane: z at: -21.75 normal: + area: 2.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutBridgeBottom plane: z at: -18.7 normal: + area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerLeftBridgeTop plane: z at: -18.25 normal: '-' area: 2.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lowerNutBridgeTop plane: z at: -15.3 normal: '-' area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampLowerSlotBottom plane: z at: -9.0 normal: + area: 27.19 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampLowerSlotTop plane: z at: -6.0 normal: '-' area: 27.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampLowerBackStep plane: z at: -4.625 normal: '-' area: 5.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftPivotSlotBottom plane: z at: -3.25 normal: + area: 14.19 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftPivotSlotTop plane: z at: 3.25 normal: '-' area: 14.19 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftNutBridgeBottom plane: z at: 13.3 normal: + area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperRightBridgeBottom plane: z at: 15.3 normal: + area: 2.68 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: leftNutBridgeTop plane: z at: 16.7 normal: '-' area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperRightBridgeTop plane: z at: 18.7 normal: '-' area: 2.68 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampUpperBackStep plane: z at: 19.625 normal: + area: 5.91 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperLeftBridgeBottom plane: z at: 20.25 normal: + area: 2.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampUpperSlotBottom plane: z at: 21.0 normal: + area: 27.99 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperLeftBridgeTop plane: z at: 23.75 normal: '-' area: 2.69 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: upperLeftBossLedge plane: z at: 24.0 normal: + area: 17.26 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampUpperSlotTop plane: z at: 24.0 normal: '-' area: 27.99 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: clampUpperBackRim plane: z at: 25.375 normal: '-' area: 3.05 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: lugNutBridgeBottom plane: z at: 26.3 normal: + area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one - name: topLeftLedge plane: z at: 28.0 normal: + area: 204.0 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [-9.75, 4] - name: topRightLedge plane: z at: 28.0 normal: + area: 79.87 area_tolerance_rel: 0.02 tolerance: 0.1 mode: one center: [18.75, 5.15] - name: lugNutBridgeTop plane: z at: 29.7 normal: '-' area: 2.61 area_tolerance_rel: 0.02 tolerance: 0.05 mode: one cylinders: - name: keyUpperFrontCounterbore point: [-2.0, 0.0, 16.4] direction: [0.0, 1.0, 0.0] kind: hole diameter: 26.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 6.0 length_tolerance: 0.05 t_range: [8.0, 14.0] description: Stated in dimension-sheet.md cylindrical row 1; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: keyLowerBackRecess point: [-2.0, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 22.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [0.0, 3.0] description: Stated in dimension-sheet.md cylindrical row 2; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: keyUpperMiddleBore point: [-2.0, 0.0, 16.4] direction: [0.0, 1.0, 0.0] kind: hole diameter: 16.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 5.0 length_tolerance: 0.05 t_range: [3.0, 8.0] description: Stated in dimension-sheet.md cylindrical row 3; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: keyLowerFrontCounterbore point: [-2.0, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 14.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.639 length_tolerance: 0.05 t_range: [10.361, 14.0] description: Stated in dimension-sheet.md cylindrical row 4; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerOuterCut point: [22.922, 7.0, -22.922] direction: [0.7071, 0.0, 0.7071] kind: hole diameter: 12.684 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 5; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampAxialOuterCut point: [25.618, 7.0, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 12.63 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 33.0 length_tolerance: 0.05 t_range: [-9.0, 24.0] description: Stated in dimension-sheet.md cylindrical row 6; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: keyUpperBackRecess point: [-2.0, 0.0, 16.4] direction: [0.0, 1.0, 0.0] kind: hole diameter: 12.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [0.0, 3.0] description: Stated in dimension-sheet.md cylindrical row 7; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampTiltOuterCut point: [28.665, 7.0, -5.054] direction: [0.1736, 0.0, 0.9848] kind: hole diameter: 11.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 22.264 length_tolerance: 0.05 t_range: [-26.345, -4.081] description: Stated in dimension-sheet.md cylindrical row 8; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampUpperRelief point: [28.75, 7.0, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 11.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 27.506 length_tolerance: 0.05 t_range: [0.0, 27.506] description: Stated in dimension-sheet.md cylindrical row 9; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampNearOffsetCut point: [25.171, 5.5, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 9.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 33.0 length_tolerance: 0.05 t_range: [-9.0, 24.0] description: Stated in dimension-sheet.md cylindrical row 10; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampFarOffsetCut point: [25.171, 8.5, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 9.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 33.0 length_tolerance: 0.05 t_range: [-9.0, 24.0] description: Stated in dimension-sheet.md cylindrical row 11; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerNearCut point: [22.504, 5.143, -22.504] direction: [0.7071, 0.0, 0.7071] kind: hole diameter: 8.787 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 12; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerFarCut point: [22.504, 8.857, -22.504] direction: [0.7071, 0.0, 0.7071] kind: hole diameter: 8.787 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 13; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampTiltNearCut point: [27.777, 5.5, -4.898] direction: [0.1736, 0.0, 0.9848] kind: hole diameter: 8.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 2.768 length_tolerance: 0.05 t_range: [-19.018, -16.249] description: Stated in dimension-sheet.md cylindrical row 14; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampTiltFarCut point: [27.777, 8.5, -4.898] direction: [0.1736, 0.0, 0.9848] kind: hole diameter: 8.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 18.97 length_tolerance: 0.05 t_range: [-23.376, -4.407] description: Stated in dimension-sheet.md cylindrical row 15; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampUpperNearCut point: [27.849, 5.5, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 8.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 19.625 length_tolerance: 0.05 t_range: [0.0, 19.625] description: Stated in dimension-sheet.md cylindrical row 16; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampUpperFarCut point: [27.849, 8.5, 0.0] direction: [0.0, 0.0, 1.0] kind: hole diameter: 8.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 24.712 length_tolerance: 0.05 t_range: [0.0, 24.712] description: Stated in dimension-sheet.md cylindrical row 17; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: leftPivotCounterbore point: [-23.92, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 6.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 5.5 length_tolerance: 0.05 t_range: [8.5, 14.0] description: Stated in dimension-sheet.md cylindrical row 18; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: upperLeftCounterbore point: [-18.5, 0.0, 22.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 6.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.8 length_tolerance: 0.05 t_range: [0.0, 9.8] description: Stated in dimension-sheet.md cylindrical row 19; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: lowerLeftCounterbore point: [-17.0, 0.0, -20.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 6.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.8 length_tolerance: 0.05 t_range: [0.0, 9.8] description: Stated in dimension-sheet.md cylindrical row 20; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: rightPivotCounterbore point: [19.92, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 6.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 5.5 length_tolerance: 0.05 t_range: [8.5, 14.0] description: Stated in dimension-sheet.md cylindrical row 21; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: upperRightCounterbore point: [20.0, 0.0, 17.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 6.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 7.8 length_tolerance: 0.05 t_range: [0.0, 7.8] description: Stated in dimension-sheet.md cylindrical row 22; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: sideScallopBore point: [22.088, 0.0, -15.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 5.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 4.649 length_tolerance: 0.05 t_range: [0.0, 4.649] description: Stated in dimension-sheet.md cylindrical row 23; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: filamentTransverseBore point: [14.708, 0.0, 30.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 4.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.242 length_tolerance: 0.05 t_range: [0.0, 9.242] description: Stated in dimension-sheet.md cylindrical row 24; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: filamentAngledBore point: [-1.248, 3.964, 30.0] direction: [0.9538, 0.3003, 0.0] kind: hole diameter: 4.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 4.854 length_tolerance: 0.05 t_range: [20.136, 24.991] description: Stated in dimension-sheet.md cylindrical row 25; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: upperLeftPilot point: [-18.5, 0.0, 22.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.9 length_tolerance: 0.05 t_range: [10.1, 14.0] description: Stated in dimension-sheet.md cylindrical row 26; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: lowerLeftPilot point: [-17.0, 0.0, -20.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.5 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.9 length_tolerance: 0.05 t_range: [10.1, 14.0] description: Stated in dimension-sheet.md cylindrical row 27; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: leftPivotPilot point: [-23.92, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 7.813 length_tolerance: 0.05 t_range: [0.0, 7.813] description: Stated in dimension-sheet.md cylindrical row 28; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: leftNutPilot point: [-22.0, 0.0, 15.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.4 length_tolerance: 0.05 t_range: [4.6, 14.0] description: Stated in dimension-sheet.md cylindrical row 29; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: lugNutPilot point: [8.0, 0.0, 28.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.4 length_tolerance: 0.05 t_range: [4.6, 14.0] description: Stated in dimension-sheet.md cylindrical row 30; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: lowerNutPilot point: [12.0, 0.0, -17.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 9.4 length_tolerance: 0.05 t_range: [4.6, 14.0] description: Stated in dimension-sheet.md cylindrical row 31; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: rightPivotPilot point: [19.92, 0.0, 0.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 7.813 length_tolerance: 0.05 t_range: [0.0, 7.813] description: Stated in dimension-sheet.md cylindrical row 32; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: upperRightPilot point: [20.0, 0.0, 17.0] direction: [0.0, 1.0, 0.0] kind: hole diameter: 3.4 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 5.9 length_tolerance: 0.05 t_range: [8.1, 14.0] description: Stated in dimension-sheet.md cylindrical row 33; yes angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: upperLeftBoss point: [-18.5, 0.0, 22.0] direction: [0.0, 1.0, 0.0] kind: pin diameter: 11.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 6.0 length_tolerance: 0.05 t_range: [8.0, 14.0] description: Stated in dimension-sheet.md cylindrical row 34; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: lugBoss point: [8.0, 0.0, 28.0] direction: [0.0, 1.0, 0.0] kind: pin diameter: 10.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 14.0 length_tolerance: 0.05 t_range: [0.0, 14.0] description: Stated in dimension-sheet.md cylindrical row 35; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerLip point: [22.922, 7.0, -22.922] direction: [0.7071, 0.0, 0.7071] kind: pin diameter: 9.184 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 36; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampAxialLip point: [25.618, 7.0, 0.0] direction: [0.0, 0.0, 1.0] kind: pin diameter: 9.13 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 33.0 length_tolerance: 0.05 t_range: [-9.0, 24.0] description: Stated in dimension-sheet.md cylindrical row 37; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampFarLip point: [25.171, 8.5, 0.0] direction: [0.0, 0.0, 1.0] kind: pin diameter: 6.0 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 32.242 length_tolerance: 0.05 t_range: [-8.242, 24.0] description: Stated in dimension-sheet.md cylindrical row 38; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerNearLip point: [22.504, 5.143, -22.504] direction: [0.7071, 0.0, 0.7071] kind: pin diameter: 5.287 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 39; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. - name: clampCornerFarLip point: [22.504, 8.857, -22.504] direction: [0.7071, 0.0, 0.7071] kind: pin diameter: 5.287 radius_tolerance: 0.025 axis_tolerance: 0.03 length: 3.0 length_tolerance: 0.05 t_range: [-3.975, -0.975] description: Stated in dimension-sheet.md cylindrical row 40; partial angular coverage. t_range is from this point along the normalized direction. Length is the remaining cylindrical surface extent, not necessarily a full uninterrupted drilled hole. planes: - name: leftLowerBevel point: [-22.946, 0.0, -23.45] normal: [-0.7373, 0.0, -0.6756] area: 45.71 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row1, stated point[-22.946, 0.0, -23.45], outward normal[-0.7373, 0.0, -0.6756], area45.71. - name: leftUpperBevel point: [-26.5, 0.0, 24.0] normal: [-0.7071, 0.0, 0.7071] area: 45.25 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row2, stated point[-26.5, 0.0, 24.0], outward normal[-0.7071, 0.0, 0.7071], area45.25. - name: rightUpperBevel point: [22.5, 0.0, 28.0] normal: [0.7071, 0.0, 0.7071] area: 44.94 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row3, stated point[22.5, 0.0, 28.0], outward normal[0.7071, 0.0, 0.7071], area44.94. - name: clampTiltWall point: [25.721, 12.259, -8.679] normal: [0.3368, -0.9397, -0.0594] area: 35.38 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row4, stated point[25.721, 12.259, -8.679], outward normal[0.3368, -0.9397, -0.0594], area35.38. - name: clampCornerUpperWall point: [17.704, 7.0, -23.326] normal: [0.7071, -0.0, 0.7071] area: 33.85 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row5, stated point[17.704, 7.0, -23.326], outward normal[0.7071, -0.0, 0.7071], area33.85. - name: leftShallowBevel point: [-26.5, 0.0, -21.925] normal: [-0.0872, -0.0, -0.9962] area: 32.94 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row6, stated point[-26.5, 0.0, -21.925], outward normal[-0.0872, -0.0, -0.9962], area32.94. - name: clampCornerLowerWall point: [19.825, 7.0, -21.205] normal: [-0.7071, 0.0, -0.7071] area: 31.99 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row7, stated point[19.825, 7.0, -21.205], outward normal[-0.7071, 0.0, -0.7071], area31.99. - name: keyNeckLeft point: [-8.566, 0.0, 5.18] normal: [0.9659, -0.0, -0.2588] area: 21.24 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row8, stated point[-8.566, 0.0, 5.18], outward normal[0.9659, -0.0, -0.2588], area21.24. - name: keyNeckRight point: [2.594, 0.0, 12.54] normal: [-0.9659, -0.0, -0.2588] area: 21.24 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row9, stated point[2.594, 0.0, 12.54], outward normal[-0.9659, -0.0, -0.2588], area21.24. - name: upperLeftBossBevel point: [-16.5, 14.0, 28.0] normal: [0.766, -0.0, 0.6428] area: 21.12 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row10, stated point[-16.5, 14.0, 28.0], outward normal[0.766, -0.0, 0.6428], area21.12. - name: rightLowerBevel point: [26.5, 0.0, -22.75] normal: [0.7071, 0.0, -0.7071] area: 23.31 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row11, stated point[26.5, 0.0, -22.75], outward normal[0.7071, 0.0, -0.7071], area16.06. Add coplanar row25 area7.25; the plane inspector sums both faces. - name: lugHexUpperRight point: [8.0, 0.0, 31.233] normal: [-0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row12, stated point[8.0, 0.0, 31.233], outward normal[-0.5, -0.0, -0.866], area12.98. - name: leftHexUpperLeft point: [-24.8, 0.0, 16.617] normal: [0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row13, stated point[-24.8, 0.0, 16.617], outward normal[0.5, -0.0, -0.866], area12.98. - name: lugHexLowerLeft point: [8.0, 0.0, 24.767] normal: [0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row14, stated point[8.0, 0.0, 24.767], outward normal[0.5, -0.0, 0.866], area12.98. - name: leftHexUpperRight point: [-22.0, 0.0, 18.233] normal: [-0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row15, stated point[-22.0, 0.0, 18.233], outward normal[-0.5, -0.0, -0.866], area12.98. - name: lowerHexLowerLeft point: [12.0, 0.0, -20.233] normal: [0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row16, stated point[12.0, 0.0, -20.233], outward normal[0.5, -0.0, 0.866], area12.98. - name: lugHexLowerRight point: [10.8, 0.0, 26.383] normal: [-0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row17, stated point[10.8, 0.0, 26.383], outward normal[-0.5, -0.0, 0.866], area12.98. - name: lowerHexLowerRight point: [14.8, 0.0, -18.617] normal: [-0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row18, stated point[14.8, 0.0, -18.617], outward normal[-0.5, -0.0, 0.866], area12.98. - name: lowerHexUpperRight point: [12.0, 0.0, -13.767] normal: [-0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row19, stated point[12.0, 0.0, -13.767], outward normal[-0.5, -0.0, -0.866], area12.98. - name: leftHexLowerLeft point: [-22.0, 0.0, 11.767] normal: [0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row20, stated point[-22.0, 0.0, 11.767], outward normal[0.5, -0.0, 0.866], area12.98. - name: leftHexLowerRight point: [-19.2, 0.0, 13.383] normal: [-0.5, -0.0, 0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row21, stated point[-19.2, 0.0, 13.383], outward normal[-0.5, -0.0, 0.866], area12.98. - name: lugHexUpperLeft point: [5.2, 0.0, 29.617] normal: [0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row22, stated point[5.2, 0.0, 29.617], outward normal[0.5, -0.0, -0.866], area12.98. - name: lowerHexUpperLeft point: [9.2, 0.0, -15.383] normal: [0.5, -0.0, -0.866] area: 12.98 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row23, stated point[9.2, 0.0, -15.383], outward normal[0.5, -0.0, -0.866], area12.98. - name: clampCornerBackBevel point: [21.107, -2.5, -24.608] normal: [0.7071, 0.0, -0.7071] area: 8.42 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row24, stated point[21.107, -2.5, -24.608], outward normal[0.7071, 0.0, -0.7071], area8.42. - name: clampCornerBottomWall point: [20.842, -0.0, -28.408] normal: [0.7071, -0.0, 0.7071] area: 6.25 area_tolerance_rel: 0.03 tolerance: 0.04 angle_tolerance_deg: 0.2 description: sources/dimension-sheet.md; inclined row26, stated point[20.842, -0.0, -28.408], outward normal[0.7071, -0.0, 0.7071], area6.25. dimensions: - name: overallWidth axis: x expected: 53 tolerance: 0.03 description: plateWidth; source envelope. - name: overallThickness axis: y expected: 14 tolerance: 0.03 description: Nominal y span; table14.001 differs by only.001. - name: overallHeight axis: z expected: 63.72 tolerance: 0.03 description: lugMaxZ - bottomZ. - name: matingFaceSeparation axis: y expected: 14 tolerance: 0.03 description: 14 - 0. between: [backDatum, frontDatum] - name: leftFootOffset axis: x expected: 4.55 tolerance: 0.04 description: leftFootX + halfWidth = -21.95 +26.5. between: [leftDatum, leftFootSide] - name: upperRecessDepth axis: y expected: 3 tolerance: 0.04 description: keyBackDepth. between: [backDatum, keyUpperBackShoulder] - name: upperBoreLength axis: y expected: 5 tolerance: 0.04 description: keyMiddleEnd - keyBackDepth =8-3. between: [keyUpperBackShoulder, keyUpperFrontShoulder] - name: upperCounterboreDepth axis: y expected: 6 tolerance: 0.04 description: plateThickness - keyMiddleEnd =14-8. between: [keyUpperFrontShoulder, frontDatum] - name: pivotCounterboreDepth axis: y expected: 5.5 tolerance: 0.04 description: plateThickness - pivotCounterboreStart =14-8.5. between: [rightPivotShoulder, frontDatum] - name: nutTrapWidth axis: x expected: 5.6 tolerance: 0.04 description: nutAcrossFlats = -19.2 -(-24.8). between: [leftNutFlatLeft, leftNutFlatRight] - name: lowerClampSlotHeight axis: z expected: 3 tolerance: 0.04 description: Table face levels -6 -(-9). between: [clampLowerSlotBottom, clampLowerSlotTop] - name: upperClampSlotHeight axis: z expected: 3 tolerance: 0.04 description: Table face levels24-21. between: [clampUpperSlotBottom, clampUpperSlotTop] deviation: null blockout: volume_min: 42000 volume_max: 47500 export_volume_tolerance_rel: 0.002 references: - path: sources/back.png kind: drawing role: authoritative sha256: 0082b3fc7dba786305b2403e8d454471030bf13072317f94c55cd314add6fc85 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Plots -x horizontally; shows the y=14 counterbore side. - path: sources/bottom.png kind: drawing role: authoritative sha256: ffcb4f042cf21f1af12962ce8e25164d444a06b3949523f7b80853c5112764d8 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/dimension-sheet.md kind: table role: authoritative sha256: 8114a967a9bfa8f1b8cb70e979bda39f2e6a02b28eee8c3c2a906a5389d6e93c units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Detailed coordinates, surfaces and sections; numbers are stated document values, not agent reference-ingest measurements. - path: sources/front.png kind: drawing role: authoritative sha256: 5eb8d869e83a8b6fda807d1a89c6a2340416e9fcc6ba7e9156e5ad9090891415 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Plots +x horizontally; shows the y=0 pocket and marking side. - path: sources/iso-below.png kind: image role: illustrative sha256: a88b88b12b762c2f233eb945e824d56e66618b4595732be098034a98fea0f4e7 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Spatial interpretation only; no metric measurements from isometric projection. - path: sources/iso.png kind: image role: illustrative sha256: b020791e7cac6906a7849143eacd5a451367a29067b7005ef9ba6031fb40490b units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Spatial interpretation only; no metric measurements from isometric projection. - path: sources/iso2.png kind: image role: illustrative sha256: 71fc8bd6986eeaaaa6ca80f0bc33b3263ab695c169a03c11adc27834e2366dfe units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Spatial interpretation only; no metric measurements from isometric projection. - path: sources/left.png kind: drawing role: authoritative sha256: 0e619ab6438f959e407e5c85024d515dcf7893d28a4f4442300eaaf2ec8ec392 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/prusa-extruder-front-description.md kind: text role: authoritative sha256: 68bb9d8de0d472b48ee4d006368d8317942fb1662c46fa57ca40444a3270e3fc units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Functional scope and frame; conflicting keyhole axis assignments retained as Q1. - path: sources/render-notes.md kind: text role: authoritative sha256: d55bcc4dd15907bcbd350f4f13f8203ae1108e811702c8146c8dc571529e1728 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm-grid convention, mesh-render metadata and envelope. - path: sources/right.png kind: drawing role: authoritative sha256: 058b38e8a33e018052f9ecce5dad1dc4ac49d7f09475300dd7760bb47516e15c units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-x-18.5.png kind: drawing role: authoritative sha256: 631dc2ecc85bb8d7ecf1ae2592d716be3f79226a496944f9649ad8422b637881 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Table/drawing topology conflict Q3. - path: sources/section-x0.png kind: drawing role: authoritative sha256: 5948745dc3a39d6be9f315b77bff89c305a1ed817e0db31efa3a9b66e811dba8 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-y1.5.png kind: drawing role: authoritative sha256: 35f64ab977673fb8c50df3c20af3c5bff32470d319d67c36e77518ef06675a51 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-y12.png kind: drawing role: authoritative sha256: 2adcdb2843aec7741582b66c0e07c3a6a955b5ea989eb2a9ec0a9c94e3004a83 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-y7.png kind: drawing role: authoritative sha256: 010bf57ad6582553c9cf903435bc324dd6629f191dd1ab16d90c258a4cca497d units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-z-20.png kind: drawing role: authoritative sha256: 4525f85f7d8aad2c964b1d88a2abe5ed4e5086bdff8103449b6e88ac4c28ab8b units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-z0.png kind: drawing role: authoritative sha256: 21d566609ed38ef40a873d62e8b99c37fb9ab24a897ebb55fc724db4aef8094a units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/section-z17.png kind: drawing role: authoritative sha256: 09015d9730b123e12ab2950371d63cd2cdcf87d9b8ff6fb5ea037df1333d5016 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. - path: sources/top.png kind: drawing role: authoritative sha256: 723eafa804a379697e33524c77c45951f601d3515f889ef73cd459437721c335 units: mm revision: Undated supplied bundle; upstream CAD revision unspecified note: Orthographic mm grid/material outline; pixel readings carry wider tolerance than tabulated coordinates. open_questions: ['Q1 — Keyhole conflict: prose places Ø26 at z=0 and Ø14 at z=16.4 and implies a lower Ø16 cylinder; the dimension table and sections reverse those counterbores and show a lower taper. Which is intended? Draft checks provisionally follow the table and sections; intent is preserved verbatim.', 'Q2 — View naming: front.png shows the y=0 hex-pocket/marking side, although the frame calls y=14 the front. Are these camera labels only? This draft uses numerical coordinates and the requested datum definitions.', 'Q3 — Topology: the table gives three outer loops at x=-18.5, while the section drawing says two regions. Which is authoritative? Draft acceptance uses the table''s 662.84 mm2 and three loops; the drawing says 662.94 mm2 and two regions.', 'Q4 — Construction: exact angular trims and connecting blends of the partial clamp surfaces are not tabulated. Can further drawings resolve them? All 40 cylinders and functional planes are specified; surrounding blends remain underdetermined, and the pivot-mouth Ø3.9 is only raster measured.', 'Q5 — Diagnostics: quoted volume 29833.56 mm3, area 11557.87 mm2 and centroid [-0.703,6.989,-2.703] mm lack a complete analytic exterior. Should they ever become mandatory gates? They remain nonbinding; schema 1 cannot label these acceptance quantities diagnostic-only, so their fields are null.', 'Q6 — Cosmetics: exact fan-lobe outline, lug fillet radius and R1/arrow outlines are unspecified; embossed versus recessed is also unclear. May they remain omitted or approximate? Shared envelope and functional checks still apply.', 'Q7 — Manufacturing: material, density, print settings and physical fit tolerances are unspecified; trap hardware is called both nut and heat-set hardware. Which material and fasteners/inserts are intended? Only documented geometry and digital tolerances are specified.', 'Q8 — Thickness: the table bbox reaches y=14.001 but the face and renders give 14.000. Is the extra 0.001 intentional? This draft retains the requested y=14 datum with a 0.03 mm envelope tolerance.']